All WFS Mat systems utilise our insulated, twisted dual core heating element, protected by an armour braid and our advanced tough heat resistant fluoropolymer outer jacket. All WFS cables have a high IP rating of 67 which is suitable for use in wet areas and in conjunction with wet room systems. The heating element is attached to a 100% fully self-adhesive fibreglass mesh for rapid and superior installation without any need for priming on a clean dust free floor, ensuring zero lift in self-levelling compounds and peace of mind, no messing around with the peeling of double sided tapes. WFS heating mats come with only one power lead wire making it easy to install without raising the floor level. All WFS cables are manufactured in Sweden, world leaders in underfloor heating process and quality. WFS Cable manufacture complies and surpasses all UK and European standards and requirements.
WFS advanced heating cable systems have been manufactured for professional use, yet are easy to install at any skill level. Our 3mm cable systems provide supplementary heating for bathrooms, kitchens, and living areas. The ultra-low profile of our heating cables enables them to be installed in a matter of hours without raising floor levels. The heating elements are simply fixed to the sub floor and tiled straight over for a perfect heated finish every time.
WFS advanced heating mat systems have been manufactured for professional use, yet are easy to install at any skill level. Our Under laminate cable systems provide supplementary heating for bathrooms, kitchens, and living areas where a dry install is required with a laminate or engineered floor finish. The ultra-low profile of our heating cables and simple pre-set layout enables them to be installed in a matter of hours without the need for screeding. The heating elements are simply laid into the pre-set grooves of the under laminate insulation board and the final floating floor finish is laid directly on top ensuring perfect even heating every time.
Programmable Touchscreen Thermostat that is ultra-compact and provides precise control and is easily configured to control the temperature and timings for most Heating systems.
Thermal insulation is recommended to be used in conjunction with electric underfloor heating systems and is suitable for use with either a solid or suspended ground floor and will meet the current building regulation U value requirements.
