APPLICATIONS:
- Wafer Cleaning & Rinsing (Wet Bench Systems)
- Heating of Flow-Flashpoint Solvents & Acids
- For Use with Single Pass or Recirculating Systems
- Similar Uses as PFA-Tube Heaters, but Higher Temp Limits
- Processes Involving Explosive Vapors
- Situations where Exact Temperature Control is Critical
FEATURES & BENEFITS:
- Fluid Path has No Contact with Heating Elements
- Allows for Safe Heating of Low Flashpoint Solvents
- Heated Media is Isolated in Seamless 316 Stainless Steel Tubes
- Solvent Tubes are Passivated and Electro-Polished for Purity
- Self-Draining Flow-Tubes Eliminate Trapped Debris
- Cooling Tube Quick Reduces Heat Below Flashpoint
- NEMA 7 Explosion-Proof Electrical Enclosure
- Equipped with Robust Sensor & Switch Array
Specifications:
Power:
- 6 kW Total to 8 kW Total
- Voltage Range: 208 – 480 V
- Max Line Current: 30 A per circuit
Tubing (Solvent Tube):
- .750” OD (3/4″) (19.1 mm)
- .065” Wall (1.7 mm)
- Overall Process Tube Length: 115.5” (2934 mm)
- 316L Stainless Steel, Passivated & Electro-Polished
Tubing (Cooling Tube):
- .250” OD (1/4″) (6.3 mm)
- .035” Wall (0.9 mm)
- Overall Process Tube Length: 86.25” (2190 mm)
- 316L Stainless Steel
- Max Pressure: 3100 psi (213 bar)
Enclosure:
- NEMA 7 (explosion-proof)
- (Class 1, Div. 1 and 2, Groups B, C and D)
Max Working Temperature:
- 392°F (200°C)
- Published temperatures are for housing at 12 o’clock position;
- Higher temps may be possible at 6 o’clock position. See factory for details.
Sensors:
- Two J-Type Thermocouples (cast in)
- One J-Type Thermocouple (removable)
- Snap Action High Limit Switch (with auto reset)
Fittings:
- Solvent Tube: Flaretek®-Compatible or Swagelok® VCR
- Cooling Tube: NPT or Swagelok® VCR
Available Accessories:
- Insulating Jackets
- Compression Fittings
| Universal Solvent Heater |
