These heaters are constructed using Watlow’s exclusive mineral insulation, which has high thermal conductivity. The band and strip emitters are also constructed of rugged stainless steel sheath with a high emissivity coating. These heaters can operate at temperatures to 1300°F (700°C), and 30 W/in2 (4.7 W/cm2)
Specifications:
| Material | Maximum Operating Temperatures | Maximum Watt Densities | ||
|---|---|---|---|---|
| °F | °C | W/in2 | W/cm2 | |
| Stainless steel | 1300 | 700 | 30 | 4.7 |
- Maximum operating temperature up to 1300°F (704°C)
- Maximum watt densities up to 30 W/in² (4.7 W/cm²)
- Strip Emitters: width: 2in. (51mm); length: 6in. (152mm). minimum, 31 in. (787mm)maximum
- Band Emitters: width: 1 in. (25mm), 2 in. (51mm), 3 in (76mm). maximum; Segment Length: 6 in. (152mm) to 42 in. (1067mm) maximum
- Mounting studs and mounting clips available
- Optional thermocouple or thermocouple pocket welded to sheath
- Contact Watlow representative for partial arcs up to full 360 degree coverage
- High emissivity coating on inside is standard. For high emissivity coating on the outside, contact your Watlow representative
- Post terminals are standard. High-temperature leads are available on bands only.
Applications:
- Heating rotating drums and rollers
- Tube ovens
- Small spot heating
- Heat shrinking and curing wire coatings
- Heat laminating wheels
Features & Benefits:
| Features | Benefits |
|---|---|
| Exclusive mineral insulation |
|
| High thermal conductivity of MI |
|
| ISO 9001:2008 (Exp. 2018) St. Louis |
| Heater Catalog (Complete – .pdf)Â |
| Heater Catalog (Section) – Heater Reference Data |
| Heater Catalog (Section) – Radiant Heaters |
